Outdoor Living, Upgraded

Patio & Lanai Coatings in Tampa, FL

Turn a stained, cracked slab into a finished outdoor room. Our Simiron flake system is sealed with a UV-resistant polyaspartic topcoat made for the Florida sun, on screened lanais and open patios alike.

  • UV-resistant topcoat for full sun
  • Slip-resistant additive available for areas that get wet
  • 15-year transferable warranty against delamination
Book Your Free QuoteTakes about 2 minutes
Free, no obligationAbout a 30-minute visit
800+5-Star Google Reviews
4×Best of Tampa
15-YearResidential Warranty
1 DayMost Installs
Lanai floor before and after coating in TampaSimiron Certified Installer
Lanai before & after, Tampa Bay
Made for Florida Outdoor Living

Your Lanai Deserves More Than Bare Concrete

Florida patios and lanais take sun, rain, humidity and constant foot traffic. Bare or painted concrete stains, flakes and fades, and the wrong coating can yellow or lift once moisture gets underneath.

Our system is built for it. We diamond grind and repair the slab, put down a moisture-resistant Simiron epoxy basecoat and full decorative flake, and seal it with a UV-resistant polyaspartic topcoat. Screened lanais and open patios each get looked at for sun, drainage and how the slab breathes before we recommend anything.

What is a lanai or patio floor coating?

It's a multi-layer resin system bonded into ground concrete: a Simiron 1150FC epoxy basecoat, a full broadcast of decorative flake and a UV-resistant Simiron Polyaspartic HS topcoat. It turns a plain slab into a seamless, easy-to-clean surface made for outdoor use, usually in a single day.

Why Coat Your Patio

Built for Sun, Rain and Real Life

Everything a Tampa Bay outdoor space needs from its floor.

UV-Resistant Topcoat

The polyaspartic topcoat is UV-resistant, and Simiron rates it for outdoor use.

Added Texture Option

We can add a slip-resistant additive to patios and lanais that get wet, and steps get one at no charge.

Hose It Off

A seamless, sealed surface. Pollen, dirt and spills rinse away instead of soaking into the concrete.

Cracks Repaired First

Cracks and pits are filled and old paint or sealer is ground off before coating.

Cooler Color Options

Darker colors get hot in full sun. We'll help you pick a lighter blend for open, sunny areas.

Match Your Home

40+ flake blends to coordinate with your pool area, trim or home exterior.

The Simiron System

Outdoor-Rated. Installed to Spec.

The same four-layer Simiron system we put in garages, matched to the sun, drainage and moisture of your outdoor space.

Exploded view of the Simiron flake coating system layers
  1. Diamond Grind & Repair

    We open the slab to CSP-3, fill cracks and grind off any old paint or sealer.

    Never acid etch
  2. 1150FC Epoxy Basecoat

    100% solids, zero-VOC epoxy that bonds into the concrete and resists moisture vapor coming up through the slab.

    Rated to 12 lbs MVT / 85% RH
  3. Full Flake Broadcast

    Decorative vinyl flake for color and texture. A slip-resistant additive can be added for areas that get wet.

  4. Polyaspartic HS Topcoat

    UV-resistant and rated by Simiron for both indoor and outdoor use.

    Holds color in full sun
How It Works

From Free Quote to Finished Patio

Clear the space, and we handle the rest. Most patios and lanais are done in one day.

1

Free Quote Visit

About 30 minutes

We check sun exposure, drainage, cracks and moisture, measure, and show you samples. Written price good for a year.

2

Prep & Repair

Install day morning

The crew arrives between 8 and 9 AM, grinds the slab and repairs cracks and edges.

3

Coat & Seal

About 6–8 hours total

Basecoat, flake and polyaspartic topcoat go down the same day.

4

Back to Living

Same day to ~48 hours

Light foot traffic usually that evening. Your crew lead will tell you when furniture and grills can go back.

Recent Work

Patios & Lanais We've Transformed

Screened lanais, open patios and pool-side slabs across Tampa Bay.

Coated screened lanai floor in Tampa
Screened lanai
Coated lanai with screen enclosure
Lanai
Tan flake patio coating
Patio
Covered patio with flake coating
Covered patio
Outdoor patio slab with flake coating
Open patio
Watch

See What a Coated Lanai Feels Like

A quick look at a finished Performance floor, plus a full walkthrough of how our crew preps, repairs and coats an outdoor slab.

Patio Coating Process in Tampa, FL

Compare

Coating vs. Paint or Stain

Painted and stained patios look good for a season. Here's why a coating system lasts longer outdoors.

What You're ComparingPerformance Floors & CoatingPaint or Stain
Surface prepDiamond ground to CSP-3Washed or lightly etched
BondBonds into the ground concreteSits on the surface
Sun exposureUV-resistant topcoatFades and chalks
MoistureBasecoat rated to resist vapor up to 12 lbsPeels when moisture builds up
LookSeamless flake finish, 40+ blendsFlat color
Warranty15-year written, transferableRarely any
Reviews

Lanais Our Customers Can't Stop Using

5.0
★★★★★
800+ Google reviews
★★★★★
“We are so happy with our floor on our lanai, it turned out beautifully!”
Cyndi F.Google review
★★★★★
“Both were just concrete but now they look great. The garage floor is clean and the patio looks like an extension of the family room.”
Janice G.Google review
FAQs

Patio & Lanai Coating FAQs

Straight answers to what Tampa Bay homeowners ask us most. Still have a question? See all FAQs or call (813) 212-2271.

How much does a patio or lanai coating cost?

Every slab is different, so we don't post a flat price online. Size, crack repair, moisture readings, any old coating that has to come off, and the finish you pick all change the number. A specialist measures and inspects your concrete at a free visit (about 30 minutes) and gives you a written price that's good for a full year. See what goes into pricing, and ask about financing.

Is a screened lanai different from an open patio?

A little. Screened lanais hold humidity differently, while open patios take more direct sun and rain. We look at sun exposure, drainage and how the slab breathes, and test for moisture, before recommending your system.

How does the coating handle the Florida sun?

We top every patio with Simiron Polyaspartic HS, a UV-resistant topcoat that Simiron rates for both indoor and outdoor use. That makes it a strong fit for open patios as well as covered lanais, where sun exposure is a big factor.

Is it slippery when wet?

Like any outdoor surface, a coated patio can be slippery when wet. The flake adds some texture, and for patios and lanais that get wet we can add a slip-resistant additive to the topcoat. Steps get one at no charge. No coated surface is slip-proof. Any floor can be slippery when it's wet or has oil, sand or debris on it, so use the same care you would on any wet surface.

Does a coated patio get hot?

Any surface in full Florida sun gets warm, and darker colors get hotter. If your patio gets direct afternoon sun, we'll help you choose a lighter flake blend.

Can you coat pavers or tile?

No. We don't coat or seal pavers, and we don't coat over tile. Our system is designed for concrete. Not sure what you have? Send us a photo or ask at your free quote.

My patio has cracks and old paint. Can it still be coated?

Yes. Crack repair is part of every install. Cracks and pits are filled and smoothed before any coating goes down, and old paint or sealer is ground off. One honest note: concrete keeps moving, so a repaired crack can occasionally show as a faint line over time. That's cosmetic, not the coating failing.

How long does it take, and when can we use the patio again?

Most patios and lanais are done in one day. Light foot traffic is usually fine that evening, and your crew lead will tell you when furniture, grills and heavier items can go back based on the temperature and humidity that day.

Can you coat the steps and walkway too?

Yes. Concrete steps and connecting walkways can be added so everything matches, and steps get a slip-resistant additive at no charge. Wooden steps can be coated but aren't warrantied.

What does the warranty cover?

Every residential install is backed by our 15-year warranty against delamination, meaning the coating peeling or lifting off the concrete under normal use. It's in writing and transferable to one subsequent buyer of your home. Read the warranty details.

More Residential Coatings

Coat More of Your Home

Same Simiron system, same crew and the same 15-year warranty. Bundling surfaces into one visit is easy to plan.

Guides Worth Reading

Serving Greater Tampa Bay

Give Your Outdoor Space a Captivating Look

Our reputation in Tampa is built on consistently exceeding our clients’ expectations. We measure our success by the joy of homeowners who now relish their enhanced outdoor spaces.

 

Your outdoor spaces are unique, and we treat them as such. We collaborate closely with you to tailor our coatings to your specific needs and design preferences, bringing your outdoor vision to life.

 

When you choose Performance Floors and Coating for your patio and lanai floor coatings, you’re choosing a partner dedicated to elevating your outdoor living with the highest quality and aesthetics. Contact us today, and let’s embark on a journey to transform your patio and lanai into spaces you’ll be proud of. Your outdoor areas deserve nothing but the best – choose Performance Floors and Coating.

See the Transformation for Yourself

From drab concrete to stunning surfaces — view our gallery of recent work in garages, patios, and driveways throughout the Tampa Bay Area.

Customize Your Look – Flake Colors That Fit Your Style

Customize Your Look – Flake Colors That Fit Your Style

Best Floor & Coating Company for 2 years in a row!

The Patio and Lanai Floor Coating Approach

Our professional process for patio and lanai floor coating installation in Tampa ensures a seamless and stunning result.

Assessment:

We begin by understanding your vision and conducting a thorough assessment of your outdoor space. This step allows us to customize a solution that meets your unique needs and preferences.

Preparation:

Proper preparation is the foundation of a lasting finish. We meticulously clean and repair the surface, addressing any cracks or imperfections to ensure a smooth canvas for coating application.

Primer Application:

A high-quality primer is applied to create a strong bond between the existing surface and the coating, ensuring durability.

Coating Application:

Our skilled professionals expertly apply the selected patio and lanai floor coating system. We offer various options, including epoxy and polyurethane, to achieve the desired look and functionality.

Finishing Touches

We pay attention to every detail, including adding an anti-slip finish for safety and ensuring a seamless, even surface.

Ready to Transform Your Floor?

Don’t settle for dull, cracked, or stained concrete. Let Performance Floors and Coating turn your space into a sleek, durable surface you’ll love for years to come.

A Hassle-Free 3-Step Process to Your New Floor

Request Your Free Quote

Fill out a quick form or give us a call. We'll assess your space and recommend the best solution — no pressure, no obligation.

Schedule Your Installation

Choose a time that works for you. Our team arrives on time, prepared, and ready to deliver professional, mess-free service.

Sit Back & Enjoy the Results

Relax while we transform your floor — most jobs are completed in just one day! Get back to using your space with confidence.

What are the Benefits of Patio Coatings in Tampa, FL?

Increased Safety: Our premium coatings are slip-resistant, making your outdoor patio safer for kids, families, and guests. No more worrying about unfortunate accidents on broken concrete-a quality concrete coating can protect your home far into the future.

 

Less Maintenance: Polyaspartic patio coatings require less maintenance than uncoated concrete or traditionally epoxy-coated concrete. You can rest in knowing that your patio will look brand new for years to come. Never have to put up with cracked, dingy concrete ruining the aesthetics of your yard again with quality polyaspartic concrete coatings.

 

Increased Durability: Our customized concrete coatings are optimized for durability and longevity. They are formulated to resist even the toughest climates and can last up to twenty years with proper care.

 

Waterproof: The epoxy coating acts as a protective barrier. When combined with a polyaspartic top coat, it functions as a sealant to protect patio and lanai coatings from moisture and potential mold. Florida is no stranger to humid climates, and this can wear away on outdoor surfaces if left unprotected. Say goodbye to damp patios with the assurance and longevity that patio and lanai concrete coatings can provide.

What Our Customers Are Saying

From drab concrete to stunning surfaces — view our gallery of recent work in garages, patios, and driveways throughout the Tampa Bay Area.

“Performance Floors just finished our lanai. The surface now looks beautiful. Andrew came to our house to sell us the product and service and we are very pleased with the outcome. I recommend you call Performance Flooring and Andrew Highlam to give your lanai a beautiful appearance.”

Ginger Perkins

4 Months Ago

“This is the 3rd house that we have owned that we have had the garage floor professionally finished and by far Performance Floors and Coatings exceeded my expectations above the others.
I explained that I needed the floor done as soon as possible. “

Michael Mozo

3 Months Ago

“Our experience with Performance floors and Coating was outstanding. Their garage floor epoxy services exceeded expectations. The flawless application process resulted in a durable and visually appealing finish. The team’s professionalism and efficiency made the entire process seamless.”

Anjana Paudel

4 Months Ago

Frequently Asked Questions

Browse our most common inquiries to learn more about our process, products, and what to expect.

Performance Floors and Coating specializes in high-quality coatings for garage floors, patio/lanai areas, and driveways. We offer expert solutions to transform these spaces into durable, attractive, and functional areas.

Our team comprises seasoned professionals with years of experience in the industry. We are committed to excellence in every project, ensuring meticulous installations and top-grade materials such as epoxy and polyurethane for long-lasting results.

Choosing us means choosing a partner dedicated to enhancing your space with the highest quality and aesthetics. We collaborate closely with our clients to tailor our coatings to their specific needs and design preferences, ensuring satisfaction with the final result.

Our coatings are highly durable and resistant to heavy traffic, chemicals, UV rays, and weather elements. We use top-grade materials and employ skilled professionals to ensure the longevity and endurance of our coatings.

Simply contact us today to discuss your project requirements and schedule a consultation. Our team will work with you to understand your vision and provide expert recommendations tailored to your space.

Scroll to Top