
Food & Beverage Floor Coatings in Tampa, FL
Seamless concrete coatings for breweries, commercial kitchens, prep areas and food storage. Built for water, grease and daily cleaning. Installed by Tampa Bay's only Simiron Certified Dealer.
- Seamless surface with no grout lines
- Slip-resistant texture available for wet areas
- High-wear urethane for the toughest areas


Floors for Wet, Busy Work Areas
Food and beverage spaces see water, grease, sugars, cleaners and constant traffic. Bare concrete absorbs spills and is hard to keep clean, and grout lines hold onto grime.
We grind and repair the slab, test for moisture, and install a seamless Simiron system with slip-resistant texture where floors get wet. For the hardest-working areas, we'll talk through a high-wear urethane topcoat. We also review your cleaning products and process before recommending a system.
What is the best floor coating for a brewery or commercial kitchen?
It depends on your water, temperatures and cleaning routine. Many brewery and back-of-house areas use a seamless resin system with slip-resistant texture, and the hardest-working areas may call for a high-wear urethane topcoat. Health-code requirements vary, so confirm what your inspector requires and we'll match the system.
What Food & Beverage Floors Need
Production, prep, storage and front-of-house areas all work differently.
Wet Areas
Slip-resistant texture can be added wherever floors stay wet.
Seamless Cleaning
No grout lines and no porous concrete, so floors clean up faster.
Spills & Cleaners
A topcoat Simiron rates for superior chemical resistance. We check your products against Simiron data.
Hot Water & Temperatures
Tell us about your process and washdowns. We recommend a system based on them.
Area by Area
Brewhouse, kitchen, cold storage and taproom floors often need different systems.
Taprooms & Front of House
Flake or metallic finishes for the spaces your customers see.
Floor Systems for Food & Beverage
Built on Simiron materials. Every floor starts with diamond grinding, crack repair and a moisture test.
High-Wear Urethane
A tough urethane topcoat installed over a flake or solid-color system for added wear resistance.
Why it fits: Added wear resistance for the hardest-working production and prep areas.Decorative Flake
Full flake broadcast over an epoxy basecoat, sealed with a UV-resistant polyaspartic topcoat.
Why it fits: Durable and textured, with slip-resistant texture available.Solid Color
A seamless, chemical-resistant color coat for a clean, uniform look.
Why it fits: A clean, uniform look for storage and back-of-house.Metallic Epoxy
A high-gloss, one-of-a-kind finish with movement and depth.
Why it fits: An eye-catching finish for taprooms and dining areas.From Free Quote to Finished Floor
A clear plan from the first walk-through to the day your team is back on the floor.
Free Site Walk
On your scheduleWe look at the slab, traffic, chemicals and moisture, measure each area and talk through how your space operates.
Written Quote
Scoped by areaYou get a written quote that spells out the system, prep and timeline for each area of your facility.
Prep
Diamond grind + repairIndustrial grinders open the concrete with HEPA dust control. Cracks and pits are filled and old coatings come off.
Coat & Seal
Basecoat to topcoatBasecoat, broadcast or color coat and topcoat go down. Many areas are finished in a day; larger floors take longer.
Back in Service
Same day to ~48 hoursLight foot traffic usually later the same day. Vehicles and equipment after the heavy-traffic cure, about 48 hours at typical temperatures.
Commercial Floors Across Tampa Bay
A look at commercial floors we've coated: service bays, kennels, warehouses, shops and metallic showpieces.









Food & Beverage Floor Coating FAQs
Straight answers to what Food & Beverage businesses ask us most. Still have a question? See all FAQs or call (813) 212-2271.
Can you coat commercial kitchens and food production areas?
Yes, we coat back-of-house, prep, brewery and storage areas. Seamless coated floors don't have grout lines and are easier to clean than bare concrete. Health-code and inspection requirements vary by business and location, so check what your inspector requires and we'll talk through the system and texture that fit.
Can the floor handle hot water washdowns and steam cleaning?
Tell us about water temperatures, steam and your cleaning routine at the site walk. Very hot water, steam and sudden temperature changes are hard on many coatings, so we recommend a system based on your process, and we'll tell you if an area needs a specialty system we don't install.
Is a coated floor slippery in wet areas?
Any floor can be slippery when it's wet or greasy. For wet areas we recommend adding a slip-resistant texture to the topcoat. No coated surface is slip-proof, so keep floors clean and use normal care when they're wet. If your business has specific slip-resistance requirements, let us know at the site walk.
Can you coat our taproom or dining area too?
Yes. Many breweries pair a durable production floor with a decorative flake or metallic epoxy finish in the taproom, so the whole space looks finished.
How long will our space be out of service?
Many areas are coated in a single day, and larger floors take longer. Light foot traffic is usually fine later the same day. Vehicles and equipment wait for the heavy-traffic cure, which Simiron rates at about 48 hours at typical temperatures. On larger projects we can talk through doing the work in sections so part of your space stays open.
Our slab is in Florida. What about moisture?
Moisture coming up through the slab is the number one reason coatings fail in Tampa. We test every slab first, and our Simiron 1150FC epoxy basecoat is rated to resist moisture vapor transmission up to 12 lbs (ASTM F1869) or 85% relative humidity (ASTM F2170), and if a slab tests higher, we add Simiron's moisture vapor barrier primer first. In Simiron's adhesion testing, the concrete fails before the 1150FC releases.
What warranty comes with a commercial floor?
Commercial installs are backed by our 5-year warranty against delamination, meaning the coating peeling or lifting off the concrete under normal use. It's in writing. Read the warranty details.
How do you price commercial projects?
Every facility is different, so we don't post flat pricing. Square footage, the system you choose, prep, crack repair, moisture readings and scheduling all affect the number. We start with a free site walk and give you a written quote scoped area by area.
Commercial Coatings for Every Industry
Same Simiron systems, same crews and the same 5-year commercial warranty. See all commercial coatings.