
Manufacturing & Warehouse Floor Coatings in Tampa, FL
Durable, seamless concrete coatings for production floors, warehouses and machine shops. Built for forklifts, chemicals and constant traffic. Installed by Tampa Bay's only Simiron Certified Dealer.
- Systems matched to each area of your facility
- Topcoat rated for chemical and abrasion resistance
- 5-year commercial warranty against delamination


A Floor Built for Production
Forklifts, pallet jacks, chemicals and heavy traffic wear bare concrete fast. Concrete dust settles on product and equipment, stains spread, and peeling coatings turn into maintenance headaches and downtime.
We look at each area of your facility separately. Production floors, warehouses, break rooms and offices often need different systems, so we match the coating to the traffic and chemicals in each one.
What is the best floor coating for a warehouse?
Busy warehouses and production floors often get a solid-color or flake system over a Simiron 1150FC epoxy basecoat with a chemical- and abrasion-resistant topcoat, plus a high-wear urethane topcoat in the heaviest traffic lanes. Lighter-use storage areas may only need grind and seal. We recommend a system after looking at your equipment, loads and chemicals.
What Industrial Floors Need
Production, storage and support areas each put different demands on the slab.
Forklifts & Equipment
Tell us your equipment and loads and we'll recommend a system built for that traffic.
Chemical Resistance
A topcoat Simiron rates for superior chemical resistance. We check your chemicals against Simiron data.
Less Dust
Coated concrete doesn't dust the way bare concrete does, which helps keep product and equipment cleaner.
Brighter Work Areas
Light solid colors help brighten production floors and warehouses.
Area by Area
Different systems for production, storage, break rooms and offices.
Phased Installs
We can coat in sections so production keeps moving.
Floor Systems for Manufacturing
Built on Simiron materials. Every floor starts with diamond grinding, crack repair and a moisture test.
Solid Color
A seamless, chemical-resistant color coat for a clean, uniform look.
Why it fits: Bright, chemical-resistant color for production floors.High-Wear Urethane
A tough urethane topcoat installed over a flake or solid-color system for added wear resistance.
Why it fits: Added wear resistance for forklift lanes and loading areas.Decorative Flake
Full flake broadcast over an epoxy basecoat, sealed with a UV-resistant polyaspartic topcoat.
Why it fits: Durable and textured for shops, break rooms and locker areas.Grind & Seal
Diamond-ground concrete sealed with an industrial clear coat, matte to gloss.
Why it fits: An economical option for lighter-use storage areas.From Free Quote to Finished Floor
A clear plan from the first walk-through to the day your team is back on the floor.
Free Site Walk
On your scheduleWe look at the slab, traffic, chemicals and moisture, measure each area and talk through how your space operates.
Written Quote
Scoped by areaYou get a written quote that spells out the system, prep and timeline for each area of your facility.
Prep
Diamond grind + repairIndustrial grinders open the concrete with HEPA dust control. Cracks and pits are filled and old coatings come off.
Coat & Seal
Basecoat to topcoatBasecoat, broadcast or color coat and topcoat go down. Many areas are finished in a day; larger floors take longer.
Back in Service
Same day to ~48 hoursLight foot traffic usually later the same day. Vehicles and equipment after the heavy-traffic cure, about 48 hours at typical temperatures.
Commercial Floors Across Tampa Bay
A look at commercial floors we've coated: service bays, kennels, warehouses, shops and metallic showpieces.









Manufacturing Floor Coating FAQs
Straight answers to what Manufacturing businesses ask us most. Still have a question? See all FAQs or call (813) 212-2271.
Can you coat our facility in sections?
Yes. On larger facilities we can plan the work in sections so part of the floor stays in use. We'll map out the phasing with you at the site walk and show it in your written quote.
Is grind and seal enough for a warehouse?
For lighter-use storage areas, grind and seal can be a good, economical option. Forklift lanes, production floors and areas with chemicals usually need a full coating system. We'll recommend what fits each area.
Will chemicals from our process damage the floor?
Simiron rates our polyaspartic topcoat for superior chemical resistance, but every chemical is different. Share a list of what's used on your floor and we'll check it against Simiron's chemical resistance data before recommending a system.
Will a coating help with concrete dust?
Yes. Bare concrete wears and dusts over time. Once it's coated, the surface is sealed, which cuts down on concrete dust and makes the floor easier to sweep and clean.
Will the coating hold up to forklifts and heavy equipment?
Simiron rates our polyaspartic topcoat for superior abrasion, chemical and stain resistance, and it's built for high-traffic commercial spaces. Every floor is different, so tell us about your equipment, loads and traffic at the site walk and we'll recommend the system that fits. Tire marks can show on any coated floor, especially under parked vehicles.
How long will our space be out of service?
Many areas are coated in a single day, and larger floors take longer. Light foot traffic is usually fine later the same day. Vehicles and equipment wait for the heavy-traffic cure, which Simiron rates at about 48 hours at typical temperatures. On larger projects we can talk through doing the work in sections so part of your space stays open.
Our slab is in Florida. What about moisture?
Moisture coming up through the slab is the number one reason coatings fail in Tampa. We test every slab first, and our Simiron 1150FC epoxy basecoat is rated to resist moisture vapor transmission up to 12 lbs (ASTM F1869) or 85% relative humidity (ASTM F2170), and if a slab tests higher, we add Simiron's moisture vapor barrier primer first. In Simiron's adhesion testing, the concrete fails before the 1150FC releases.
What warranty comes with a commercial floor?
Commercial installs are backed by our 5-year warranty against delamination, meaning the coating peeling or lifting off the concrete under normal use. It's in writing. Read the warranty details.
How do you price commercial projects?
Every facility is different, so we don't post flat pricing. Square footage, the system you choose, prep, crack repair, moisture readings and scheduling all affect the number. We start with a free site walk and give you a written quote scoped area by area.
Commercial Coatings for Every Industry
Same Simiron systems, same crews and the same 5-year commercial warranty. See all commercial coatings.