Hangars, FBOs & Maintenance Facilities

Aircraft Hangar Floor Coatings in Tampa, FL

Bright, seamless hangar floors that stand up to fluids, tugs and equipment and make dropped parts easier to spot. Installed by Tampa Bay's only Simiron Certified Dealer.

  • Light, bright solid-color floors
  • Topcoat rated for chemical and abrasion resistance
  • 5-year commercial warranty against delamination
Book Your Free QuoteTakes about 2 minutes
Free, no obligationCommercial & industrial
800+5-Star Google Reviews
4×Best of Tampa
5-YearCommercial Warranty
OnlySimiron Certified Dealer in Tampa Bay
Flake-coated floor in a large shop with overhead doorsSimiron Certified Installer
Shop floor by Performance
Built for Hangars

A Hangar Floor That Works as Hard as Your Crew

Hangar floors deal with hydraulic fluid, fuel, oils, tugs and heavy equipment. A dusty, stained slab is harder to keep clean, and it makes leaks and dropped fasteners harder to see.

We grind and repair the slab, test for moisture, and install a bright solid-color or flake system with a topcoat Simiron rates for superior chemical and abrasion resistance. Before we recommend a system, we review the fluids in your hangar against Simiron's chemical resistance data.

What is the best floor coating for an aircraft hangar?

Many hangars choose a light solid-color system because it reflects light and makes spills and small parts easier to see. It's built on a Simiron epoxy basecoat with a chemical-resistant topcoat, and high-traffic areas can add a high-wear urethane topcoat. We match the system to your fluids, equipment and traffic.

What Matters

What Hangar Floors Need

Hangars, FBOs and maintenance shops all lean on the floor in different ways.

Bright & Reflective

Light colors help brighten the hangar and make leaks and dropped parts easier to spot.

Fluid Resistance

A topcoat Simiron rates for superior chemical resistance. We check your specific fluids against Simiron data.

Easy to Keep Clean

A seamless surface cuts down on concrete dust and is easier to sweep and mop.

Tugs & Equipment

Built for wheeled equipment and constant traffic, with high-wear options for the busiest areas.

Large Open Floors

We plan big floors in sections and talk through scheduling around aircraft movements.

Florida Slabs

Every slab is moisture-tested. High readings get a moisture vapor barrier primer first.

Recommended Systems

Floor Systems for Aerospace

Built on Simiron materials. Every floor starts with diamond grinding, crack repair and a moisture test.

Solid Color

A seamless, chemical-resistant color coat for a clean, uniform look.

Why it fits: Our top pick for hangar floors. Light colors keep the space bright.

High-Wear Urethane

A tough urethane topcoat installed over a flake or solid-color system for added wear resistance.

Why it fits: Added wear resistance where tugs and equipment run most.

Decorative Flake

Full flake broadcast over an epoxy basecoat, sealed with a UV-resistant polyaspartic topcoat.

Why it fits: A durable, decorative option for shops, offices and pilot lounges.

Metallic Epoxy

A high-gloss, one-of-a-kind finish with movement and depth.

Why it fits: A high-end finish for FBO lobbies and customer areas.
How It Works

From Free Quote to Finished Floor

A clear plan from the first walk-through to the day your team is back on the floor.

1

Free Site Walk

On your schedule

We look at the slab, traffic, chemicals and moisture, measure each area and talk through how your space operates.

2

Written Quote

Scoped by area

You get a written quote that spells out the system, prep and timeline for each area of your facility.

3

Prep

Diamond grind + repair

Industrial grinders open the concrete with HEPA dust control. Cracks and pits are filled and old coatings come off.

4

Coat & Seal

Basecoat to topcoat

Basecoat, broadcast or color coat and topcoat go down. Many areas are finished in a day; larger floors take longer.

5

Back in Service

Same day to ~48 hours

Light foot traffic usually later the same day. Vehicles and equipment after the heavy-traffic cure, about 48 hours at typical temperatures.

Recent Work

Commercial Floors Across Tampa Bay

A look at commercial floors we've coated: service bays, kennels, warehouses, shops and metallic showpieces.

Flake-coated dealership service bay with trench drain
Dealership service bay
Coated kennel runs with a solid gray floor
Kennel runs
Forklift on a flake-coated warehouse floor
Warehouse flake floor
Bronze metallic epoxy floor in a commercial space
Bronze metallic epoxy
Flake-coated floor in a large shop with overhead doors
Shop flake floor
Flake-coated commercial corridor
Flake corridor
Gray marble-look metallic epoxy floor
Marble-look metallic
Metallic epoxy floor in a commercial lobby
Metallic epoxy lobby
Flake-coated commercial floor
Commercial flake floor
FAQs

Aerospace Floor Coating FAQs

Straight answers to what Aerospace businesses ask us most. Still have a question? See all FAQs or call (813) 212-2271.

Will the coating hold up to hydraulic fluid and fuel?

Simiron rates our polyaspartic topcoat for superior chemical resistance, but every fluid is different. Send us the list of fluids and cleaners used in your hangar and we'll check them against Simiron's chemical resistance data before recommending a system. Wipe up spills promptly either way.

Why do hangars use light-colored floors?

Light colors reflect overhead light, which brightens the space and makes leaks, spills and dropped hardware easier to see. They also make a hangar look clean and well kept for customers and owners.

Can you coat a hangar without shutting down operations?

On larger hangars we can talk through coating in sections so aircraft and equipment can be moved around the work. Tell us your schedule at the site walk and we'll build the plan around it wherever we can.

Can you coat FBO lobbies and offices too?

Yes. Many facilities pair a bright, durable hangar floor with a metallic epoxy or decorative flake finish in the lobby, pilot lounge and offices.

Will the coating hold up to forklifts and heavy equipment?

Simiron rates our polyaspartic topcoat for superior abrasion, chemical and stain resistance, and it's built for high-traffic commercial spaces. Every floor is different, so tell us about your equipment, loads and traffic at the site walk and we'll recommend the system that fits. Tire marks can show on any coated floor, especially under parked vehicles.

How long will our space be out of service?

Many areas are coated in a single day, and larger floors take longer. Light foot traffic is usually fine later the same day. Vehicles and equipment wait for the heavy-traffic cure, which Simiron rates at about 48 hours at typical temperatures. On larger projects we can talk through doing the work in sections so part of your space stays open.

Our slab is in Florida. What about moisture?

Moisture coming up through the slab is the number one reason coatings fail in Tampa. We test every slab first, and our Simiron 1150FC epoxy basecoat is rated to resist moisture vapor transmission up to 12 lbs (ASTM F1869) or 85% relative humidity (ASTM F2170), and if a slab tests higher, we add Simiron's moisture vapor barrier primer first. In Simiron's adhesion testing, the concrete fails before the 1150FC releases.

What warranty comes with a commercial floor?

Commercial installs are backed by our 5-year warranty against delamination, meaning the coating peeling or lifting off the concrete under normal use. It's in writing. Read the warranty details.

How do you price commercial projects?

Every facility is different, so we don't post flat pricing. Square footage, the system you choose, prep, crack repair, moisture readings and scheduling all affect the number. We start with a free site walk and give you a written quote scoped area by area.

More Industries

Commercial Coatings for Every Industry

Same Simiron systems, same crews and the same 5-year commercial warranty. See all commercial coatings.

Serving Greater Tampa Bay

Scroll to Top