Dealerships, Service Bays & Detail Shops

Automotive Floor Coatings in Tampa, FL

Bright, seamless floors for service departments, dealerships, collision centers and detail shops. Built for oil, fluids, hot tires and constant traffic. Installed by Tampa Bay's only Simiron Certified Dealer.

  • Topcoat rated for chemical and stain resistance
  • Bright bays that match your showroom
  • 5-year commercial warranty against delamination
Book Your Free QuoteTakes about 2 minutes
Free, no obligationCommercial & industrial
800+5-Star Google Reviews
4×Best of Tampa
5-YearCommercial Warranty
OnlySimiron Certified Dealer in Tampa Bay
Flake-coated commercial bay floorSimiron Certified Installer
Commercial flake floor by Performance
Built for Service Bays

Service Bays That Look as Good as Your Showroom

Service bays take oil, coolant, brake fluid, tire dressing and dropped tools every day. Bare concrete soaks it up and stains, dust gets tracked into customer areas, and cheap coatings peel under hot tires and floor jacks.

We diamond grind the slab, repair cracks and test for moisture, then install a Simiron system matched to each area: flake or solid color in the bays, a high-wear urethane topcoat where traffic is heaviest, and metallic or flake finishes in the showroom and customer lounge.

What is the best floor coating for an auto shop?

For most service bays, a flake or solid-color system over a Simiron 1150FC epoxy basecoat with a chemical-resistant polyaspartic topcoat is a strong fit, and the busiest bays can add a high-wear urethane topcoat. Before we recommend a system, we review the fluids and cleaners you use against Simiron's chemical resistance data.

What Matters

What Automotive Floors Need

Every part of a dealership or shop asks something different of the floor.

Fluids & Chemicals

Oil, coolant, brake fluid and cleaners sit on top of a sealed floor instead of soaking in, so cleanup is faster.

Vehicles & Jacks

Built for daily vehicle traffic. Tire marks can show on any coated floor, and we'll talk through what to expect in your bays.

Brighter Bays

Light colors bounce light around the bay so the space feels brighter and cleaner.

Showroom Appeal

Metallic or flake finishes in customer areas so the whole facility looks consistent.

Wash & Detail Areas

Slip-resistant texture can be added in wet areas like wash and detail bays.

Keep Service Running

Larger shops can be coated in sections so part of the service drive stays open.

Recommended Systems

Floor Systems for Automotive

Built on Simiron materials. Every floor starts with diamond grinding, crack repair and a moisture test.

Decorative Flake

Full flake broadcast over an epoxy basecoat, sealed with a UV-resistant polyaspartic topcoat.

Why it fits: Our go-to for service bays. Textured, hides everyday wear and pairs with a chemical-resistant topcoat.

Solid Color

A seamless, chemical-resistant color coat for a clean, uniform look.

Why it fits: A clean, uniform look for bays, parts rooms and back-of-house.

High-Wear Urethane

A tough urethane topcoat installed over a flake or solid-color system for added wear resistance.

Why it fits: Added wear resistance for the busiest bays and drive-throughs.

Metallic Epoxy

A high-gloss, one-of-a-kind finish with movement and depth.

Why it fits: A high-end finish for showrooms and customer lounges.
How It Works

From Free Quote to Finished Floor

A clear plan from the first walk-through to the day your team is back on the floor.

1

Free Site Walk

On your schedule

We look at the slab, traffic, chemicals and moisture, measure each area and talk through how your space operates.

2

Written Quote

Scoped by area

You get a written quote that spells out the system, prep and timeline for each area of your facility.

3

Prep

Diamond grind + repair

Industrial grinders open the concrete with HEPA dust control. Cracks and pits are filled and old coatings come off.

4

Coat & Seal

Basecoat to topcoat

Basecoat, broadcast or color coat and topcoat go down. Many areas are finished in a day; larger floors take longer.

5

Back in Service

Same day to ~48 hours

Light foot traffic usually later the same day. Vehicles and equipment after the heavy-traffic cure, about 48 hours at typical temperatures.

Recent Work

Commercial Floors Across Tampa Bay

A look at commercial floors we've coated: service bays, kennels, warehouses, shops and metallic showpieces.

Flake-coated dealership service bay with trench drain
Dealership service bay
Coated kennel runs with a solid gray floor
Kennel runs
Forklift on a flake-coated warehouse floor
Warehouse flake floor
Bronze metallic epoxy floor in a commercial space
Bronze metallic epoxy
Flake-coated floor in a large shop with overhead doors
Shop flake floor
Flake-coated commercial corridor
Flake corridor
Gray marble-look metallic epoxy floor
Marble-look metallic
Metallic epoxy floor in a commercial lobby
Metallic epoxy lobby
Flake-coated commercial floor
Commercial flake floor
FAQs

Automotive Floor Coating FAQs

Straight answers to what Automotive businesses ask us most. Still have a question? See all FAQs or call (813) 212-2271.

Will oil, coolant and brake fluid damage the floor?

Simiron rates our polyaspartic topcoat for superior chemical, stain and abrasion resistance, and recommends it for garages and auto service areas. Because the floor is sealed, spills sit on top instead of soaking in. Wipe them up promptly, and tell us about the fluids and cleaners you use so we can check them against Simiron's chemical resistance data.

Will hot tires leave marks?

Tire marks can show on any coated floor, especially under vehicles that sit in one spot for long stretches. Most clean up with regular maintenance. We'll talk through what to expect in your bays and the cleaning routine that works best.

Can you coat around lifts and trench drains?

Yes. We coat around in-floor lifts, trench drains and other fixtures, and we'll work out the details for your bays at the site walk.

Can you coat wash and detail bays?

Yes. For wash and detail bays we recommend adding a slip-resistant texture to the topcoat. No coated surface is slip-proof, so wet bays still call for normal care.

Can you coat the showroom too?

Yes. Many dealerships pair durable bay floors with a metallic epoxy or decorative flake finish in the showroom and customer lounge, so the whole facility looks consistent.

How long will our space be out of service?

Many areas are coated in a single day, and larger floors take longer. Light foot traffic is usually fine later the same day. Vehicles and equipment wait for the heavy-traffic cure, which Simiron rates at about 48 hours at typical temperatures. On larger projects we can talk through doing the work in sections so part of your space stays open.

Our slab is in Florida. What about moisture?

Moisture coming up through the slab is the number one reason coatings fail in Tampa. We test every slab first, and our Simiron 1150FC epoxy basecoat is rated to resist moisture vapor transmission up to 12 lbs (ASTM F1869) or 85% relative humidity (ASTM F2170), and if a slab tests higher, we add Simiron's moisture vapor barrier primer first. In Simiron's adhesion testing, the concrete fails before the 1150FC releases.

What warranty comes with a commercial floor?

Commercial installs are backed by our 5-year warranty against delamination, meaning the coating peeling or lifting off the concrete under normal use. It's in writing. Read the warranty details.

How do you price commercial projects?

Every facility is different, so we don't post flat pricing. Square footage, the system you choose, prep, crack repair, moisture readings and scheduling all affect the number. We start with a free site walk and give you a written quote scoped area by area.

More Industries

Commercial Coatings for Every Industry

Same Simiron systems, same crews and the same 5-year commercial warranty. See all commercial coatings.

Serving Greater Tampa Bay

AN INFORMATIVE GUIDE TO CONCRETE COATING

Concrete floor coatings are liquid layers that will apply to cured concrete for decorative purposes. This technology helps surfaces last longer by reducing maintenance costs. It also increases the exterior appearance of the floor’s concrete surface, which may be more appealing than traditional paints or sealants in most cases.

Concrete Floor Coatings – Comparing Concrete Coating Uses.

Concrete floor coatings are a waterproof covering used for floors in garages, pool decks, concrete patios, storage facilities, factories, restaurants, and offices. Pretty much anything that has a concrete surface can be coated with our Epoxy-Polyaspartic Hybrid coating system

A well-coated surface provides the concrete with a solid protective barrier against heavy traffic dust, dirt, and other pollutants. The Epoxy-Polyaspartic Hybrid coating system-based floor coating also beautifies the look while simplifying its maintenance. The coating material, once it dries, is skid and slip-resistant as well.

However, remember that not all conditions will protect you from slipping or falling from any surface, so we still recommend you use caution to protect your family and guests when walking on your new floor coatings.

Subscribe to our Newsletter

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Share this post with your friends

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top